Lybover RECYCLING as your supplier of turnkey integrated sorting solutions. Depending the demands we define the right windshifter solution and integrate it into a turnkey solution.
AirStar©
The AirStar© uses a unique, patented Westeria system that offers the highest aerodynamic efficiency and allows a throughput of up to 400 m³/h. The sophisticated design of the air nozzles produce a precise, uniform airflow for perfect separation results. In doing so, we can achieve a 60% higher core jet speed than comparable air classifiers and even consume less energy.
- High throughput of up to 400 m³/h
- Purest separation into two or three fractions
- Optimal blow nozzle with 60% higher air jet velocity
AirBasic©
The AirBasi©c is a small, mobile machine available in various options to ensure optimum separation results at any site. The material can be fed from any direction (180°). The AirBasic© features a patented adjustable and precise nozzle system. Fully equipped, it fits into a 40′ HC container.
- Patented adjustable and precise nozzle system
- Flexible integration with other systems
- 98% guaranteed separation result
AirLift©
The ultra-light separator enables sorting processes in which the specific weights and ballistic flight properties of the respective constituents differ only slightly. Applications include, for example, the recycling of PET bottles, where the valuable PET fraction can be cleaned with high efficiency and purity from light impurities such as labels made of PE film or paper. The AirLift© also masters the great challenge of freeing biological waste from plastic contaminants outstandingly.
- Higher efficiency than normal overband suction systems
- Precise adjustment of ballistic trajectory, air speed and visibility
- Purity levels up to over 99
- Max. Flow rate 320 m³/h
AirLift© Move
The AirLift© windsifter is now more flexible than ever. The AirLift© move brings effective separation to any location. The ultra-light separator is already widely used as a stand-alone version for the removal of impurities. Materials with similar specific densities are easily separated by the unit. For compost processors, the AirLift© move therefore enables the effective and efficient removal of films from the valuable organic material.
- High purity of over 99 %
- Max. Flow rate 140 m³/h
- Precise adjustment of ballistic trajectory, air speed and visibility
- DiscSpreader and prefeeding belt integrated as standard
Wind sifters (QSS)
The material to be separated is fed directly into the zig- zag separator via a rotary valve and is distributed over the complete sifter channel cross-section. The sorting air generated by the blower flows through the sifter from bottom to top, whereby the bulk material is flushed and separated. The product must cross through the air flow at every bend of the sifter channel and then bounces off the opposite sifter wall. Here, the material with a higher density sinks in the sifter channel due to gravity. The extreme light fraction is extracted from the sifter channel by means of the upwardly directed air flow.
The air speed of the fan is set by the customer’s frequency converter. For maintenance and service work, the zig-zag separator has maintenance doors on both sides and the rotary valves are equipped with maintenance access.
Operation:
The depth of the wind sifter is adjustable and can be operated in exhaust air as well as air recirculation mode. The extracted air is cleaned via a downstream filter unit or a cyclone separator. Depending on the individual application or abrasiveness of the material to be separated, various wear housing versions are available, e.g. HARDOX, PU, stainless steel, ceramics.
Complete design in stainless steel as well as surface treatments according to requirements are also available.
Separating tables (TTS)
The machine separates a wide variety of bulk materials according to their specific weight and form. The products must be pourable and should not exceed a certain moisture limit.
Via the inlet, the material to be separated is deposited on the distribution unit and working screen via the inlet, which is driven via an eccentric. The inclination of the filter is variably adjustable. Air is fed through the material to be separated via a pressure blower attached below the screening box. The light particles are thus fluidised and separated from the heavy particles. Depending on the screen motion and incline as well as the air throughput, the heavier particles are transported up through the screen to the heavy fraction outlet and the lighter particles downwards to the light fraction outlet. The output of the pressure blower and the speed of the eccentric can be controlled electronically.
The exhaust air is cleaned via a downstream filter unit and can be fed back into the machine (air recirculation). Depending on the individual application or abrasiveness of the material to be separated, various wear housing versions are available, e.g. HARDOX, PU, stainless steel.
Windshifters (ZZS)
The material to be separated is fed directly into the zig- zag separator via a rotary valve and is distributed over the complete sifter channel cross-section. The sorting air generated by the blower flows through the sifter from bottom to top, whereby the bulk material is flushed and separated. The product must cross through the air flow at every bend of the sifter channel and then bounces off the opposite sifter wall. Here, the material with a higher density sinks in the sifter channel due to gravity. The light fraction is extracted from the sifter channel by means of the upwardly directed air flow.
The air speed of the fan is set by the customer’s frequency converter. For maintenance and service work, the zig-zag separator has maintenance doors on both sides and the rotary valves are equipped with maintenance access.
The depth of the wind sifter is adjustable and can be operated in exhaust air as well as air recirculation mode. The extracted air is cleaned via a downstream filter unit or a cyclone separator. Depending on the individual application or abrasiveness of the material to be separated, various wear housing versions are available, e.g. HARDOX, PU, stainless steel, ceramics.
